Getting Started
For whom: Those who are going to choose their first kiddie ride and want to know what to measure in their store before requesting a proposal.
What you will learn: How to draw your space, check where the equipment will enter, and separate the machine's area from the space to use it and serve customers.
Before you start: Nothing; you just need to know your store and be able to measure it.
Short answer: to choose a kiddie ride, measure three things: the free space where it will go, the entrance path (doors, hallways, and turns), and the space to use it (getting on, getting off, the line, and the companion). Then compare those measurements with the model's and its packaging, for example, the Interactive Airplane.
1. Draw the space you can actually use
Make a top-down sketch with doors, columns, counters, and customer walkways. Measure what is free today, even if you have a floor plan: furniture changes. Note the date and always use the same unit (centimeters or meters).
Separate the space that is always free from the one that is only freed up by moving merchandise. If you have to remove boxes every morning, that is a task with a responsible person; do not draw it as available space.
2. Walk through the entrance before choosing
Walk the entire path: unloading, the exterior door, the hallway, turns, elevator if there is one, and access to the final location. Note the free width and height at the narrowest point and take photos of the obstacles from both sides. A wide door is no use if there is a tight turn afterward.
Ask if the measurements they gave you are for the equipment or the packaging: they are usually different. If a piece needs to be removed for it to pass, the delivery person must confirm it.
3. Separate the machine, movement, and customer service
Draw the body of the kiddie ride in its place and add separately the movement space, the place to get on and off, and where the companion will be. Check what happens if another child arrives and a line forms. Ask for this data for the exact model: a photo of the base does not show everything it occupies when in use.
Interactive Airplane kiddie ride video
4. Compare with the model data
| Area | What you measure in your store | Model data | If it does not match |
|---|---|---|---|
| Entrance | Free width and height | Packaging measurements | Check the maneuver before confirming |
| Final location | Free sides on the sketch | Body and movement | Look for another spot |
| Customer service | Companion and line area | How to get on and off | Relocate if it blocks the path |
| Current | Distance to contact | Manual requirements | Validate before connecting |
Hypothetical example: a store measured the free corner, but only has a photo of the door with the curtain halfway up. Before quoting, you must measure the full passage; the size of the corner does not prove that the kiddie ride will fit there.
Frequently asked questions
How much space does a kiddie ride need?
It depends on the model: add the body, movement, place to get on and off, and the line. Ask for the measurements of the exact model.
What do I send for a quote?
The sketch, the free measurements of the entrance, and numbered photos of the difficult turns.
Where can I see models and prices?
In the kiddie ride collection; each product page shows its current price.
Products related to this guide
Continue with Interactive Airplane: what to check in the demonstration and How much does a coin-operated kiddie ride cost?


Massage chairs
Claw machines
Claw machines
Claw machines
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Ride-ons