Beginner Level
For whom: Those who are going to place an Interactive Airplane for the first time and want to organize the location data and startup tasks.
What you will learn: How to prepare the placement and services data, distinguish the installation from the demonstration, and gather the documentation that the person in charge should receive.
Before starting: None; have a planned location and someone to receive the equipment.
Short answer: before starting an Interactive Airplane, cross-check the measurements and requirements of its data sheet with your sketch and with the location's services, separate who installs and who does the demonstration, and give the person in charge a folder with the equipment identification, the instructions, and the support contact.
1. Define the placement
Mark on the sketch the location of the mountable unit, the user path, and the service area, as well as the service access points. Ask for the measurements of the proposed unit and relate each piece of data to the section of the location that must meet it. A photo does not allow you to calculate the operating space.
2. Ask for the technical data of the version
The power supply is the electrical supply that the equipment requires. Gather the power supply, connections, and environmental conditions data sheet of the proposed version; competent personnel will compare it with your installation. Seeing a nearby contact does not confirm that it is suitable.
Do not resolve differences with adapters or improvised changes: write down the point and ask for a review. This guide does not replace electrical instructions.
3. Agree on installation and demonstration
- Separate the preparation of the place, the placement, the installation (if applicable), and the demonstration.
- Assign each task to the person who actually takes responsibility for it: supplier, location manager, or technician.
- Confirm the scope in the proposal so you do not discover missing items on the day of delivery.
- The person who will attend the equipment should receive the demonstration, or define how it will be transmitted to them.
4. Record the startup
| Requirement | Site data | Equipment data sheet | Responsible person | Status |
|---|---|---|---|---|
| Placement | Sketch and measured paths | Verified model measurements | Location and supplier | Cross-checked before fixing the location |
| Services | Existing power supply | Version requirements | Competent technician | Reviewed without assumed adaptations |
| Startup | Area prepared and access free | Applicable instructions | Person responsible for startup | Date and checks performed |
| Demonstration | Person in charge present | Model usage sequence | Who demonstrates and who receives | Features shown and questions |
| Documents | Folder at hand of the shift | Manual, identification, and contact | Administrator | Received and pending separately |
Hypothetical example: the location has already received the equipment, but the power supply data sheet is not linked to the delivered version. The pending item is closed with that identification and its review, not marking it as "ready" because there is a nearby contact.
The HSE guide on inspection proposes reviewing according to the equipment, use, and instructions; it is a British reference of method, not a Mexican standard. Here it translates to noting what was checked, who did it, and what is missing.
5. Hand over the folder to the person in charge
Include the equipment identification, the documents, the support contact, and the startup record. Distinguish the instructions for use from the tasks reserved for technical personnel. Before enabling the operation, check that each pending item has a responsible person and a next action.
Mountable Interactive Airplane in video
Frequently Asked Questions
Do I need a special installation for a mountable unit?
It depends on its data sheet: measurements, power supply, and conditions of use. Have it reviewed by competent personnel with your sketch.
Who should receive the demonstration?
The person who will attend it daily or, if they cannot be there, define how it will be transmitted to them.
Where can I see the model and its price?
In the data sheet of the Interactive Airplane; the current price is there.
When inquiring, send the sketch of the location, the location's services, and the name of the person who will receive the demonstration. This specifies the scope of the startup and the documents of the version.
Products related to this guide
Prepare my startup via WhatsApp
Continue with Interactive Airplane: how to check controls and use, Mountable, children's simulator or video game and Mountables by age.
References for the method: HSE — Inspection of work equipment. The examples in this guide are original.


Massage chairs
Claw machines
Claw machines
Claw machines
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Ride-ons