Beginner Level
For whom: Those who want to bring a ride to an event and need to know if the venue is suitable.
What you will learn: How to describe the event venue, compare it with the model's requirements, and decide whether to accept, change locations, or postpone.
Before you start: Know where the event will be held and who is organizing it.
Short answer: Having a tent is not enough to ensure a ride is properly placed. Check if the venue is open to rain or sun, what the floor is like, how the equipment enters and where it connects, and compare it with the model's requirements. If something does not match, change locations or postpone.
1. Describe the actual event venue
- Indoor or outdoor? Is it open on the sides?
- Type of floor, uneven surfaces, and foot traffic.
- Where the ride enters and where the line forms.
Describe the venue during setup, the event, and removal. A photo taken in good weather only shows that moment.
2. Ask for the model's requirements
In this guide, we use the Patito Ride. Ask for its manual and operating requirements before deciding. Do not assume it withstands water, wind, or heat without documentation. If the venue does not meet the requirements, the answer may be another location; the tent does not correct that difference on its own.
Patito Ride video
3. Coordinate access and power
Note the delivery route, placement point, times, and available power outlet. A competent person must compare them with the manual and the venue's installation. Do not improvise extension cords or connections.
4. Define who does what
Separate the event organizer, the person who attends to the ride, and the person who supplies it. Agree on how changes and incidents are communicated and when use is suspended. The British HSE guide on venue design helps organize this information; it is not a Mexican standard or the model's manual.
5. Decide: accept, relocate, or postpone
| Condition | Compare with | Responsible party | Decision |
|---|---|---|---|
| Area under tent | Model requirements | Organizer and supplier | Do not approve based on the tent alone |
| Floor and placement | Review of the point | Competent person | Accept or relocate |
| Power | Model requirements | Technical staff | Confirm without improvising |
| Setup and removal | Agreed access and times | Organizer, operator, and supplier | Confirm before the event |
Hypothetical example: the organizer offers a covered space that is open on the sides, and no one has checked the model's requirements for it. The protection is not taken for granted: a review is requested and an alternative location is sought. If no location is confirmed, the ride is not approved, even if the tent is already set up.
Frequently Asked Questions
Can I use a ride outdoors?
Only if the model's requirements allow it and the venue meets them; ask for them in writing.
Do you rent rides for events?
Yes, check the event rental; availability is confirmed for your date.
What should I send for a quote?
Photos of the venue, date, city, and access details.
Products related to this guide
Continue with Playground: organize supervision, hygiene, and incidents and Party business: how to add machines in stages.
Reference: HSE — Venue and site design. It is used as a general method within the scope of this guide.


Massage chairs
Claw machines
Claw machines
Claw machines
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Virtual reality · Pre-owned
Ride-ons
Ride-ons